GSO 1.25 Focuser Base + Gemini EAF Plate (130mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GSO 1.25 Focuser Base + Gemini EAF Plate (130mm)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
GSO 1.25" EAF-compatible dual-speed Crayford focuser base + mounting plate for a Gemini EAF (adapted for a 130mm Newtonian tube)
I bought this focuser, and the shop offers a choice of two base plates for mounting it to the tube — the one I picked didn't fit my 130mm tube.
So I used the base plate from this model as a starting point and enlarged the hole to clear the focuser's travel. I also had to enlarge the hole on the tube itself.
You'll need:
2x 4x5x6 heat-set inserts
2x M4x5 screws
4x M3 nuts (embed into the base by pausing the print at the right layer)
4x M4x10 screws
4x M4x80 screws