UNOFFICIAL SV08 & MAX INDX Blank Tool Joiners/Spacers

Original models, and remixes of Sovol/Bondtech/3DPrintDemon official CAD models:

Blank Tool Joiner/Spacer Remix for EU 1515 

Use BS/Snorca,OrcaSlicer/PrusaSlicer text tool to add numbers or text to your liking.

There are two options, the original size:

The 33mm wide ones that was manually cut to size to fit 13 tool on the max with CPAP cooler, works with no cooler too:

The small fit is illustrated here:

If you use the source code, they need 3DPrintDemon's original blank spacer file!

Codur's models

1515 sliding nut for M3 heat set inserts that are 4mm tall and 5mm wide, attached for convenience.
Source proper 1515 T-nuts if you can.

Tools needed

Ignore the hack saw, just get a good enough and small enough hand saw with which you can cut precisely enough and any marker pen.

This one was cut by hand, good enough?

Old 1515 joiners remixed for European standard 1515 extrusions

It is recommended to use 1515 T-nuts with 3DPrintDemon's original extrusion mounts instead of these

You can use the attached 1515 mounting slide-in plastic nuts. These need voron standard M3 heat inserts.
All parts designed for ABS, if your printer is calibrated, these should fit well without using support.

Remember: 5 walls!
Also if you have 1515 T-Nuts, you don't need to print these!

If you use the source code, they need 3DPrintDemon's original files.

• demondIndxLowerLeft12.stl

• demondIndxLowerRight12.stl

• demondIndxUpperRight12.stl

• demondIndxUpperLeft12.stl

• demonBlankSpacer.stl

Assembly Instrucions

Assemble the left hand side first, the top part has a protrusion. Then the left side can be assembled last.