remix of Hackman V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this remix makes use of the original magnets and allows them to slide easily into place.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix uses the excellent mechanism of V3 but changes the magnets holes so they can use the original magnets easily, All the assembly instructions are with the Hackman V2.
You must use V3 parts except for my remix. I suggest printing the parts as presented and not changing the orientation. Supports and not needed and I strongly suggest not using them.
I used PETG 0.15 Balanced, 15% Gyroid infill, 2 perimeters, 6 top layers and 4 bottom layers.
I used Polymaker PETG with a 0.9 extrusion multiplier - this was to avoid over extrusion and narrowing the opening for the magnets.