TSA008 Disc Detainer Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tensioning tool for TSA008 disc detainer locks (for locksport).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
A tensioning tool designed specifically for the TSA008 disc detainer lock / keyway for use in locksport activities. There are two versions: Version A, the lever faces to the right when the tool is inserted in the keyway; Version B, the lever faces to the left when the tool is inserted in the keyway.
Note: This is not a key and it will not open the lock on its own.
Print Recommendations
0.4mm nozzle at a 0.2mm layer height.
Support under the nub.
PLA or another material with decent rigidity.
Obligatory disclaimer: This tool is in no way intended for use in illegal activities of any kind. You accept all liability when you download, print, and use this tool. Don't be stupid; stay legal. Additionally, it should go without saying, but this is a plastic tensioner, so... Use light tension, otherwise you risk breaking part of the tool off inside your lock. Use at your own risk!