3x5 index card holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
desktop stand/holder for 3x5 index cards. Holds a stack of 100 cards in the back, displays 1 card.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple 3x5 Index Card Holder
This design holds a stack of ~100 index cards (packs of 100 made by Oxford works perfectly) and there's a slot to display a card at an angle.
finger access slots are added on all 3 sides of the stack holder so that even when you run low on cards, you can still easily take a card.
The bottom plate of the stack holder is skeletonized with a hex pattern to save material.
Print Settings
the minimum wall width is 2mm, so it can be printed with basically any nozzle size. Any material works, since it just sits on a table all day.
When you take the print off the build plate, it might appear flimsy. Once you put a stack of index cards in it, it works fine.
STEP file is included for easy modification. Enjoy!