Acrylic Paint Set Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Everything but the skull om the "Skull Lid Version" was created by me. The skull was designed byhttps://www.printables.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
The bottom and the lid of the "Plain Version" you can print without supports. I printed it at .2 layer height, 15 % infill with grid pattern at 150mm/s. You will need supports for the "Second Level" and the "Skull Lid Version" Feel free to mod as you wish. You will also need to sand the bottoms outside (4) corners to allow the lid to slide over it without it getting stuck. The skull was created by https://www.printables.com/@Toto108_4670861 whom is not affiliated with me nor do they endorse me in any way. Great skull by the way.