Snapmaker U1 Heated Chamber Grill Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original fits very well, but I want to heat my build chamber. To prevent cold air from flowing in from below...
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 367
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The original fits very well; however, I want to heat my build chamber—something the U1 isn't designed for. To prevent cold air from flowing in from below, I sealed the holes and increased the thickness of the solid area to 0.9 mm so the part doesn't crumble during removal (they snap in quite tightly on my machine).
Printing with ABS, ASA, or a similar material is strongly recommended (since it gets hot inside the build chamber).
Before you equip your printer with a heater, please consult relevant groups (e.g., the official Snapmaker Discord -> printer-modifications) regarding necessary cooling, safety, and required modifications — the U1 was not designed by Snapmaker to be heated!