1 / 2
Coin Engraving Jig | Batch 6-Coin Fixture | 40mm Coins, Multi-Size Compatible — zdjęcie 1
1 / 2

Coin Engraving Jig | Batch 6-Coin Fixture | 40mm Coins, Multi-Size Compatible

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Batch coin engraving jig for laser work — align 6 coins at once, 40mm LightBurn template included. 6.5mm/25mm OC pattern

Ocena
0 / 5
Polubienia
0
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Standard Digital File License

Repeatable coin engraving for batch jobs — line up six coins at once and stop resetting your workpiece between every piece.

This jig uses standard 6.5mm holes on 25mm OC spacing, so it drops into any compatible XY/alignment setup. The included SVG template is dialed in for 40mm coins, but the jig body works with other coin sizes too — six at a time, every time in the same spot.

Built for shops running coins for teams, events, gifts, or small-batch orders where consistency matters more than doing one coin at a time.

What's Included:

  • Coin engraving jig STL/MF & SVG 40mm coin template

Compatibility:

  • 6.5mm hole / 25mm OC hole pattern

  • Works with standard laser beds; pairs with an XY jig if your setup needs the workpiece raised (see notes)

Notes:
I run mine on an XY jig because my laser has extended leg risers and won't come down far enough otherwise. If you're on a standard bed, you don't need the XY jig — this drops in on its own.

Closing:
Download it, run it on your next coin batch, and let me know how it performs in your setup. If you want the physical jig pre-built instead of printing your own, check my Etsy shop — link in profile.

https://songdawgdesigns.com/shop

Tagi