Bladerunner (A Free/Voidrunner Cosmetic Reformat)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bladerunner is the fourth in line of iterations upon Chance's Freerunner, focusing on altering cosmetic elements.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 13
- Wydruki
- 2
- Wyświetlenia
- 260
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Bladerunner is effectively a Voidrunner with some cosmetic retouches and some slight hardware variation. It retains the same compatibility with the same motors, flywheels, machined cage, and BCAR.
Bill of Materials:
x2 M3x20
x3 M3x25 (2 for cage mount, 1 for switch cover)
x12 M3x8 (for BCAR)
x12 MF63ZZ 3x6x2.5 bearings (for BCAR)
x1 M3x14 (could be 12 to 16, for upper switch mount)
x13 M3x10
x9 M3x5x4 heatset inserts
x1 M3 hex nut (for battery door, I recommend supergluing the nut in place)
x5 M3x12 pins
x1 15-21A full-sized microswitch
16-20 AWG silicone insulated hobby wire
x1 XT30 connector
x2 130-180 20.4mm brushed motors
x2 mini-sized wheels
x1 Machined 32.5mm Flycore Cage module (You can also print this out of PETG or PC)
It Effectively assembles the same as a Voidrunner (Freerunner with rev-switch)
You can contact me or Yoshifumi on Discord at r.delta.i or yoshifumishimizu respectively.
In the future, I intend to add a lower variant with fidlock mounts, some type of foregrip, and remote line support.
Thanks to atarabyte, charlescobostwick, summerr.exe, and michaelatmatterhackers for taking pictures at Opensauce!
Thank you Yoshifumi for beta testing!