Stressless Ottoman leg to cushion mount replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Leg to cushion mount replacement for Stressless (Ekornes) ottoman/footrest.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement leg to cushion mount for an old Stressless ottoman. The original part was metal, so I made the 3-D printed replication slightly more sturdy in key dimensions, but still within necessary dimensions for intended fitment and function, and printed it at an angle for improved part strength.
Print Settings:
Printer:
Prusa XL
Enclosure:
Yes
Filament:
Tested with PCCF
Layer Hight:
Tested with 0.25. Would not recommend anything much higher, for the sake of easy part fitment.
Infill:
Tested with 10% grid
Exterior Perimeters:
4
Brim:
Yes
Heated Bed:
Yes
Supports:
Yes
Snug
Approximated Filament Usage:
4.90 (m)
Approximated Print Time:
51 minutes on stealth