Auto Feeder Pot Stand.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple printable stand to add inside tall pots to add a healthy reservoir below your plant!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A simple printable stand to add inside tall pots to add a healthy reservoir below your plant!
Weave water wicking string into the holes of the base and drop them down into the water.
Ensure the your string rests on the floor of your pot to maximize water intake.
You can print the Auto Feeder Water level mount and use a dowl as the level. Just use an old plastic bottle taped to the bottom of the stick for buoyancy. Then you can mark off your lowest position on the dowl when your bottle is on the base of the pot, and again when its floating while full of water.
MUST USE FABRIC POTS!
Roots can pierce through the pots and dip down into the water!
USE PETG FOR BEST RESULTS!