Bolt-On AAIO for QMX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bolt on enclosure type for the AAIO board
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the bolt on version for the AAIOv1 board available at N7TRX.com.
Must be installed with any 1.5-1.6mm thick plate still on the radio side. Use the factory aluminum plate, a factory side rail or either of my published end plate designs but do not use with end plates or rails that are thicker than 1.6mm or thinner than 1.5mm.
You need to print and use the frame at the far left side of the bolt on enclosure if you are not using a factory side rail.
If you have some TPU, I highly recommend printing the port cover. Not using the port cover does degrade audio quality.
Print with 0.2mm layer height.
If you already have a plug in style AAIO and want to try this out, you will need (4x) m2.5x35mm flat head bolts.