Schnappt Hubi Die
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This die can be used to replace the spinner in the small version of the game Schnappt Hubi. 2 sides are the hubi (1…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This die can be used to replace the spinner in the small version of the game Schnappt Hubi. 2 sides are the hubi (1 action), 2 sides are the clock (1 action), 1 side is 2 actions and 1 side is 3 actions. This layout provides the same probability as the spinner.
I recommend printing with the 2 pip side down to reduce the bridging required, though the clock side down would probably be good too.
Die can be customized for size though very large/small sizes will likely not look as good.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
75%
Filament: eSun PLA+ Grey
Notes:
Printing with high infill improves the feel of the die by increasing the weight. I found 75% to have a reasonable heft and not be too light.
Category: Dice