Visored Barbute
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an easy 3-piece helmet that has a bottom shell, top shell, and a face plate. Easy to assemble.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Share Alike
ASSEMBLY - You must create shims from a random spool to properly align the helmet base and top. Once done, insert the shims into the slots on the base of the helmet. Then add your visor in. Finally, line up the holes on the top shell with the shims and add a line of superglue around the rim to lock it in place. NOTE - there is extra room on the helmet to add foam padding. This may result in the helmet being too big if you don't add the foam in.
The design is not medieval accurate, but I thought the helmet looked cool and wanted to print one. When I went to print one, all I could find was people charging ridiculous sums for a single simple helmet. Mine is not as fancy as theirs, but hopefully you will find it far more reasonably priced.
Good luck everyone