Pie token and wedges for Trivial Pursuit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement "pie" token and category wedges for Trivial Pursuit
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 510
- Wydruki
- 6
- Wyświetlenia
- 1718
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement “pie” and wedges for trivial pursuit. I don't have any pink filament, so I just used purple instead. The “pie” color doesn't matter - so go nuts w/ gold, galaxy silver, glow in the dark, lipstick red, whatever.
100% compatible with the original tokens & wedges - print just what you're missing.
Printed in PLA, .2mm layer height, no infill needed. I printed on a PEI sheet and even then had to use some sheet weld/Magigoo since the “wedge” parts are so small. I suggest printing the wedges top side down for more adhesion. Takes about 1 hour to print a token & 6 wedges with the settings I use.