1 / 1
2020 Extrusion Aluminum V-Slot Corner Connector — zdjęcie 1

2020 Extrusion Aluminum V-Slot Corner Connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Mateusz' connector for 3-way/inner corners where one one piece of extrusion blocks the connector.

Ocena
0 / 5
Polubienia
5
Pobrania
24
Wydruki
0
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

For 3-way corners where one one piece of extrusion runs through the corner (in the photo, see the piece perpendicular to the view plane), one wouldn't be able to use the original connector because the part that runs inside the extrusion channel occupied the corner. This remix removed that, such that those corner arrangements are now possible.

You might ask, why not just change which piece of extrusion goes in the front? If that works for you, great. In my case, this had to be able to sustain impact stresses predominantly in one direction. This arrangement maximized the overall corner strength in those places by ensuring that the aluminum extrusions rather than the 3D printed parts endured those impacts.

Tagi