1 / 3
Coconut Fiber Stand for the Elho Watering System (Ø24 cm) — zdjęcie 1
1 / 3

Coconut Fiber Stand for the Elho Watering System (Ø24 cm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand for Coconut Fiber Rod | Support for Climbing Plants

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This 3D-printed stand was designed specifically for the 24 cm Elho Watering System (Living Black | Ø 23.7 × H 22.2 cm). It is used to secure a coconut fiber stake in the pot and serves as a support for climbing plants such as Monstera or other climbing houseplants.

 

The stand is designed for use with mineral-based potting mix. The Elho Jazz Round 26 cm (Tuscan Red | Ø 26 × H 24.2 cm) was used as the planter.

 

The stem of the following coconut fiber stake fits into the opening of the stand:

https://www.amazon.de/dp/B0DRG7MQ15

 

Dimensions:

Coconut stake diameter: 21.3 mm

Inner diameter of the opening: 22.5 mm

Outer diameter of the support tube: 26.3 mm

Height of the base plate: 4 mm

Total height (including support tube): 144 mm

The base holds the coconut stick centered in the pot and ensures that it does not slip in the growing medium. This provides the stick with additional support and allows it to be used as a stable trellis.

Note

This model was designed for the specified coconut stick and the Elho irrigation system. The fit may vary with other pots or coconut sticks.

Tagi