For Honda Brake & Clutch Pedal Stopper Pad- 46505-SA5-000
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this model to replace your broken clutch/Brake stopper on Honda
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 147
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Honda 46505-SA5-000 Replica (Brake/Clutch Pedal Stop Pad)
This is a 3D-printed replica of the OEM Honda part 46505-SA5-000 (commonly used as a brake or clutch pedal stop pad).
Printing & Material Recommendations
Material: It is highly recommended to use a high-temperature resistant material (such as ASA, ABS, or Nylon) to ensure the part doesn't warp or degrade under intense summer dashboard heat.
Scaling: Due to varying printer tolerances and material shrinkage, you may need to slightly scale the model up or down (by 1–2%) in your slicer for a perfect fit.
Installation Tip for a Snug Fit
Achieving a 100% perfect, play-free friction fit can be tough depending on your print settings. If you notice any slight wobble or play after installing it:
Tip: Place a small piece of electrical tape or wiring harness tape over the mounting hole before pressing the part in. This fills the micro-gaps and ensures a solid, snug fit.
