1 / 1
1989-1991 Yamaha FZR1000 Intake boots — zdjęcie 1

1989-1991 Yamaha FZR1000 Intake boots

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Carburetor to cylinder head intake boots for 1989-1991 Yamaha FZR1000

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed some intake boots due to cracking and having vacuum issues with my 1991 motorcycle. The parts would need to come from Japan and would take 2 month minimum to arrive. I had made this model completely on my own so it only has one set of alignment tabs for the carburetor side. Printed from 95A TPU and has been tested fairly hard with engine temps reaching around 200 degrees C (392 F). I have been driving the bike with no issues of vacuum loss and the little surface area fuel touches on the joint between the two has not come across as an issue for those curious. I used regular hose clamps instead of OEM as the OEM ones also have an alignment tab which i did not include but the original ones will work if you remove the spacer ring between the clamp ends as i had tested that. Not sure if these would work for the other years or bike models but I'm sure they would be close

Any questions or any ideas on updates to the model fire away! Any positive reviews would be welcomed as i know this file at the time of making them did NOT exist

Tagi