Flexible Filament Adapter Compatible Hood Insert For CC2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement hood insert that is compatible with the flexible filament adapter for the CC2
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a printable insert replacement for the CC2 that is compatible with the flexible filament adapter. This allows you to use the hood while printing without having to remove the adapter.
To remove the stock one it's the reverse of how you assembled it. Squeeze the sides together and it should pop out. Make sure to clean the support material off well, and the new one should slide in and fit snuggly. The large 45 degree gap on the left of the adapter is to assist with easier printing. I tried to model it to use minimal supports.
Print with the large front face laying down, and tree supports enabled. Strength really doesn't matter so 2 walls and 5% infill is good enough. Use PETG, PLA would probably warp from the heat.
Also, the adapter that elegoo provides uses obscure ptfe fittings. Use this model if you want to use the generic/common/cheap ones off of Amazon: https://www.printables.com/model/1720439-modified-flexible-filament-printing-adapter-for-ce
I've included the fusion file if anyone wants to make any tweaks.