Yakima License Plate Flipper - Grumpy's Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plate holder for the yakima evo holdup and holdup 2 bike rack to help prevent obstruction of plate. Remixed Pure Goof
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Grumpy's Remix of Pure Goof's Yakima License Plate Flipper. No longer a flapper!
The plate is made to fit my local bike rack plate size (ACT, AU), and is designed to lock into position in both the upright and down positions of the Yakima Hold Up 2 bike rack. The original model was also made to fit the Yakima Evo HoldUp, but I have not got access to one to test if my modifications will work with it.
The bottom of the plate needs to clear the rack in the upright position, so if you resize the plate for your local sizes, ensure you resize from the top side of the plate, not the bottom.
I used 2x 65mm long M6 bolts. I have the one through the slide section with a nyloc nut, plus washers. The nyloc nut allows you to get a tight nut whilest still leaving the bolt loose enough on the bracket to let it slide. The other bolt is used to lock the position and has a 2mm hole drilled through the end and a 2mm R Clip, effectively using the bolt like a hitch pin (I wasn't able to find an appropriate sized hitch pin locally)
I recommend orienting the plug on your print bed so that the layer joins end up going vertically up the tab, as opposed to across it, to improve strength. I recommend using PETG for improved flexibility for the same reason.