Connectable display stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
These cute stands are great for displaying your collectibles, figurines, or anything else you want slightly elevated. Multiple stands can connect together in case you can't fit one big enough into your printer. Or print them in two different heights and connect together to create a bleacher-like look!
You'll need 2 of the pegs for each pair of stands you want connected. The pegs friction fit. I did a lot of tests to dial them in, but plastic can shrink at different rates depending on your printer and filament. If the pegs are too tight or loose, scale them in your slicer to make them fit. They use very little plastic so it's not too wasteful to make a few attempts.
The model is parametric, so the width, depth, and height can be adjusted. I uploaded a couple sizes here that I used myself in the pictures. If you want different sizes, use the OnShape link below, open the "Variable Table," and change width, height, or depth sizes. Otherwise leave a comment here and I can make and upload whatever size you'd like.