Elegoo Saturn 4 Ultra 16K Drip Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the Resin Tank while it drains.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — NoDerivatives
I had designed one of these for my Peopoly SLA printer and it works great so I designed one for my new Elegoo Saturn 4 Ultra 16K.
It just stacks together. You can glue it together if you like but I made it so that the tongue and groove joints are an interference fit. I also included a short piece in case you need to make it a little taller.
This makes it super easy to drain the tank and use the silicone spatula to scrape the resin. I included my filter funnel. If you try to use a regular funnel it will block the filter drain holes. This should work for other Elegoo SLA printers. If in doubt just print the top and check for fit.
PLA .25 layers 15% infill. The top should be printed upside down. All other parts should be printed right side up.