Tabletop sculptures, painted in Full Spectrum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 tabletop sculptures, prepared for Full Spectrum printing with 4 real filaments and many mixes
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
These are tabletop sculptures by GrimGreeble and MZ4250. My only contribution is painting them with mixed colours in the slicer (Snapmaker Orca 2.3.5), so they are ready for full spectrum printing.
You will need those specific colours to get the same results, but you are free to substitute your own filaments, edit mixes and so on. I recommend slicing and looking from the top at about 45° to determine if mixes work with your filaments.
You don't need to know TD values of filaments, but an accurate hex value is useful.