ASUS Ascent GX10 Cooling Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It runs hot. Cool it down!
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 627
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a cooling base for the ASUS Ascent GX10, a GB10 based AI computer. The device typically runs very hot under load, and I would like to increase its life by helping it with cooling.
In my tests using a constant workload via the NVR software I am making which has a constant idle usage of about 50% GPU, some NVENC and NVDEC usage as well as about 4 cores of the CPU it ran between 70-73C. After adding this fan base it now runs around 9C cooler at between 61-64C with the same workload.
This print has an extreme overhang. It has printed twice with no issues however, your mileage may vary.
Required Parts:
4x M4S or M4 heat set inserts
4x M4x35 screws
4x M3 heat set inserts
4x M3x25 screws:
Also, way to power the 12v fan. I used a spare 12v wall wart, and DC jack wired up the yellow (positive) and black (negative) wires from a fan extension cable. There are luxury options for lots of fans and probably lots of budget options at your favourite budget electronics outlet.
The build instructions are under the files section.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨