Bigscreen Beyond Top Strap Stabilizer - Thicc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thicker version of LonnyK's top strap stabilizer
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
The original is a great design, but I was having some issues with it snapping at the layer lines, so I doubled the thickness of some of the walls. Also added more fillets and chamfers in certain areas for strength on corners and eliminate need for support in some areas.
I printed it in PETG, but could probably be done in PLA as well.
Print in orientation it comes in from STL to reduce stress on layer lines.
Use tree supports, but exclude support in shown area. They are not needed here and will be too difficult to remove. Letting the slicer decide on support anywhere else should be fine.
Two download choices:
Right side only - Use your slicer to mirror it to create the left side
Pair - Be sure to do the above mentioned support exclusion for both sides.
