1 / 2
Matching Screw Caps for Telescope to Phone Adapter (overengineered) — zdjęcie 1
1 / 2

Matching Screw Caps for Telescope to Phone Adapter (overengineered)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Knurled, matching press fit screw caps for the overengineered phone to telescope adapter.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These replace the original screw caps for X/Y/Z adjustment with knurled ones that match the other knobs on the mount (cut off the original knobs and modified). The square channel has also been tapered by 0.5 degrees, which at least for me (PLA knobs, PETG shafts), made them snap on to the shafts very tightly with no glue required.

The STL has 3 copies, since you'll need 3 knobs anyways. F3D included for modifications if desired.

Tagi