OXO Good Grips Clear Ice Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insulated tray to fit OXO Good Grips Covered Ice Cube Tray for making clear ice.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v3.0
Insulated ice tray for OXO Good Grips Ice Cube Tray for making "mostly" clear ice! Clear ice is made from directional freezing, this tray provides 1" of insulation around the silicone mold. Since there's no place for the bubbles to escape at the bottom, you'll get some cloudiness there, but if you don't let it freeze completely, it should look pretty clear.
Print details
Filament: PETG
Fill type: Gyroid (this type of infill is important to allow spray foam spread throughout the part)
Fill density: 5%
Perimeters: 4
Preparation
Drill holes in corners (the 3mf file has modifiers to remove top/bottom layers for spray foam holes on the bottom). I manually drilled 1/16" holes in the top corners to make sure the foam spread throughout the tray.
Fill with water and pour out (moisture helps the spray foam cure).
Fill with spray foam slowly, allow time for the foam to expand.
Let cure for 24 hours and remove excess foam.
Insert silicone mold, fill with water, and freeze!
If you like this, Buy Me A Coffee