Airsoft Speedloader/BB Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tub for BBs that has roughly the same dimensions as an M4 magazine to allow a good fit in a vest
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
If you are like me, you have always had trouble with carrying enough bbs to support a round of airsoft. I myself own an SR25 that offers very little magazine capacity. There have been multiple scenarios where I am in an optimal position to eliminate someone and then ran out of bbs in the moment when I most needed them.
Enter this speedloader. It has plenty of room for those critical-moment bbs when your gun decides it wants to be uncooperative. The capacity lies around a stunning 1,150 bbs. It has also been designed with convenience in mind. It fits well into the front pocket of a tactical vest where spare magazines can be stored; convenient if you need to refill quickly or on the go!
For optimal strength, print with 3 walls, 15% infill. If for whatever reason the cap doesn't fit the way that you like, try scaling it up or down by about 1% in your slicer. That should give it the room it needs.
Thank you for downloading this model! Please like this model or post a make if you want more 3D printed airsoft gadgets.