Index Controller Stick Fix (If you cant run/turn max speed anymore)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement sticks for the valve index controllers that have a smaller stem. This allows you to hit maximum on old units
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 2
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation platform. These models are only listed here on printables, for free, for you to print or use a print service like PCBway or JLCPCB, or your friends.)
Replace your control sticks for your index controller if you can no longer push to maximum. The stem is smaller, allowing more movement.
Print in PETG/PLA with supports 0.08mm resolution and 100% infill and the head down or the head up.
If you print it head down, youll need to sand it. Head up should be fine on well tuned printers.
To install:
Use a spudger to pop the plate off of the controller.
Hold the plate nearby to avoid having to unplug the cable.
Pull the existing stem off.
Remove the flex cable for the touch sensor.
Install the new control stick you printed; push it down until it bottoms out and then tilt it around until it finds a good spot.
Reinstall the top plate.
note: You will lose the touch sensor on the thumb-stick, this is usually broken on most controllers by the time your having this movement issue though anyway.
UPDATE:
7.21.26 - Adjusted the fit on the stem; adjusted the offset from the switch body.
7.22.26 - Fixed issue where click was inconsistent.
7.24.26 - Improved printability in the upright orientation. Tightened fit to shaft with some reliefs.
7.25.26 - Adjusted fit