Flight Stand for Transformers AotP Liege Maximo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With Liege Maximo and its interesting alt mode, it's time to create a flight stand to help spotlight it!
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
With Liege Maximo coming as brand new figure with one of the most interesting alt modes we've seen in a while, it felt apt to create a flight stand to spotlight that!
The flight stand will actually come with two variant bases, which we will come to in a bit.
Once printed and assembled, the holder part will sit at the top of the stem piece. Liege Maximo in his alt mode can then be seated atop the holder piece, with the stand's peg connecting to the port in Liege Maximo's underside.
And once attached on, Liege Maximo can be dramatically displayed in his flight mode!
We've also added some 5mm ports around the sides of this base piece so parts and accessories can be stored safely too.
As an alternative, we've also provided a simple crossbar variant which attaches to the bottom of the stem piece, allowing for a simpler flight stand with a more subtle look and smaller footprint.
Liege Maximo will peg onto the top just as before, and should look sleeker with this variant.
Hope this will help elevate (heh) the look of Liege Maximo being displayed in flight mode. Happy 3d printing! =)
===
This model is not to be uploaded or sold in any form and is intended for personal use only.
Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)
Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog