Door handles for insect door Empasa MASTER PRO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacing the original inner grips that are far too small.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
The original inner handles are useless as they are too small and you constantly end up touch the net directly and damage it on the long term. The new handles are larger but the use the same mechanism which is to fit them in the groove of the frame profiles. You will have to cut the bar that presses in the net a couple of centimeters shorter. The handle will be pressed into the groove instead of the bars.
Printing material: I ended up using PLA+ because with PETG the profile which is supposed to fit in the frame groove broke easily.
Infill: 15% will do
Printing orientation: obviously the groove profile needs to be at the top and the flat bit of the handle down.
Support: no