CoreOne INDX spool numbering plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily interchangeable number plates for the INDX system's original spool holder
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
CoreOne INDX spool numbering plates
Easily interchangeable number plates for the INDX system's original spool holder
Fits the original spool holder of the INDX system. The size of the center pin (chock) can be adjusted in PrusaSlicer to make it a tight fit into the cross recess (may be necessary for self printed spools with different filaments)
Recommended print setting:
0.4 nozzzle
0.20 mm structured
2 perimeters
no supports
Scale chock as desired, see picture below
Mounting instructions:
Press the plate into the cross recess of the spool holder; note that you may need to rotate it until it fits in completely.
To remove the plate, use your fingernail or a flat-head screwdriver to lift it.
