Mount For GjordNära 4-Way Automatic Irrigation Timer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nice to have it tidy
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a mount for the GjordNära 4-Way Automatic Irrigation Timer which is useful to mount it tidily to things - as requested by my wife. I printed this with "TPU for AMS" so it has a little flex, and the filament is also pretty strong.
This design does not account for the sensor input on the back, because we don't have that sensor yet and I didn't notice it existed.
This requires the following things for assembly:
4x M4 heat set inserts
4x M4x12 screws and washers
4x screws and washers for mounting the unit to something. The holes are 6mm wide.
Once you have printed this, use the model as a template for making pilot holes for the screws and a hole to make the battery accessible in whatever you are attaching to. We used a wooden plank and cut a hole in the back. Note the batteries pull out at a slight downwards angle, so adjust your cutting to compensate for this.
Please find the assembly instructions in the files section with the model.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨