1 / 1
MEKANIKA - Conical Dust Reducer 100mm Male → 50mm Female — zdjęcie 1

MEKANIKA - Conical Dust Reducer 100mm Male → 50mm Female

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to connect a 100 mm dust extraction hose to a 50 mm port. Originally made for a Mekanika FAB CNC setup, but the

Ocena
0 / 5
Polubienia
3
Pobrania
6
Wydruki
0
Wyświetlenia
44
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Designed to connect a 100 mm dust extraction hose to a 50 mm port. Originally made for a Mekanika FAB CNC setup, but the dimensions are standard so it works with most shop vacuums, dust collectors and extraction systems using these common hose sizes.

The conical profile keeps airflow smooth and limits the pressure drop you get with abrupt step-down adapters.

Specs ( printed on bambulab H2D 0.2 balanced strength profile )

  • Large end: 100 mm (male)

  • Small end: 50 mm (female)

  • Print time: ~ 2h45

  • Filament used: ~ 56g

Print settings

  • Material: PETG or ABS recommended (PLA works but can deform near a warm shop vac motor)

  • Layer height: 0.2 mm

  • Walls: 3–4 perimeters

  • Infill: 15–20 %

  • Supports: not required if printed vertically (large end down)

  • Orientation: vertical, large diameter on the bed

Notes
Fit is snug by design. If your hose is a tight fit, a light sanding pass or a 0.1–0.2 mm horizontal expansion tweak in your slicer will sort it out. Wrap the joint in tape if you want a fully airtight seal.

Feedback and makes welcome.

Tagi