Modular Drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular drawer for the Ultimate Drawer System There's only one (empty) drawer and individual compartments.
- Ocena
- 4,8 / 5
- Polubienia
- 238
- Pobrania
- 1078
- Wydruki
- 10
- Wyświetlenia
- 8393
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a modular drawer for the Ultimate Drawer System
There's only one (empty) drawer and individual compartments. It's great to take only one compartment instead of the entire drawer. Also, you can re-arrange your drawers easilly by moving or adding compartments
I provide one unique STL for each height (1U to 6U) cause it's too long to export them one by one (12 x 12 x 6 different models...). If someone have time to export to individual stl, don't hesitate ! ;)
That contains from 1x1 to 12x12 compartments. You can use any box combination that match a 12x12 grid.
In PrusaSlicer, right click on the model, Split > To parts...
In S3D just load the big stl and go to Mesh > Separate Connected Surfaces to split the file.
Probaly a similar feature exist in other slicer or 3d softwares...