Kitchenaid Dishwasher Top Rack Dishrack Wheel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wheel holder for a Kitchenaid dishwasher top rack. HIGH TEMP FILAMENT REQUIRED
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Open Community License v1.1
This is a wheel holder for a Kitchenaid dishwasher top rack. Fits model number KUDP01ILWH2, and is a direct replacement for part number WP8268785, https://www.searspartsdirect.com/product/5iv1pqh6vq-0022-665/id-wp8268785 .
You must print this in a high temp filament, I would recommend a heat deflection temp of at least 100° C. I used Polymaker PET-CF17, https://fiberon.polymaker.com/product/pet-cf17/. PET-CF can be printed on any open frame 3D printer no problem, it printed flawlessly on my Prusa MINI. This filament worked great, its stood up to multiple cycles at maximum cycle temperature with no deformation. I initially tried with Polymaker HT-PLA-GF, but this filament was too brittle and broke every single time I tried to assemble it.
Minimal supports are required to print the overhangs, and I would recommend 3-4 walls for durability.