Satyr 3 Headphone Grille - Raindrop and Phyllotaxis Fascia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two front grilles for Satyr 3 headphones, Raindrop and Phyllotaxis, on a 94 mm mounting ring.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
The Satyr 3 headphone fascia takes a slotted grille, such as Interlocking Slots A from the Satyr3 Alternate Fasciae model. This model gives you two other faces for the same place: Raindrop, rings of slots with short bridges, and Phyllotaxis, a spiral of round holes. Both use the same 94 mm ring, so the rest of the headphones stays as it is.
The first four pictures are photos of Raindrop, printed in translucent blue PETG on my own Satyr 3. The rest are renders of the STL files.
The two Satyr 3 grilles
Open area is the share of the 70.56 mm opening that the slots leave free, measured on the STL files. Interlocking Slots A leaves 54.3 % free, so both of these are more closed than it is.
Raindrop - 66 slots in staggered rings, joined by short bridges. 44.5 % open, narrowest web 1.54 mm. This is the one in the photos.
Phyllotaxis - 191 round holes between 1.56 and 3.22 mm, laid out in a golden-angle spiral. 30.0 % open, narrowest web 0.75 mm, which is about two extrusion lines on a 0.4 mm nozzle.
Same mounting as Interlocking Slots A
Both files are 94 mm across and 8 mm tall, with a 70.56 mm opening, a 2 mm face and a 45 degree outer chamfer from 94 to 80 mm. I measured Interlocking Slots A the same way and the numbers match.
Raindrop also keeps the two blind holes of Interlocking Slots A: 4.0 mm wide, 77.6 mm apart, opening on the back. The Phyllotaxis file has no blind holes, only the ring, so check how your cups locate the grille before you print it.
Against Interlocking Slots A
If airflow through the front matters to you, Interlocking Slots A is the more open one. Raindrop gives up about 10 points of open area and Phyllotaxis about 24, in exchange for a different look.
Printing the grilles
Face down on the bed: the 45 degree chamfer holds itself up and the slots start on the bed. No supports, no brim. The open side down also slices without supports, with the face bridged.
Settings I use: PETG, 0.16 mm layers, 3 walls with Arachne, 15 % gyroid infill, 4 top and 4 bottom layers.
The sliced Phyllotaxis project (open side down, matte beige PETG) came to about 2 hours and 19.7 g on a Bambu Lab P1S. I have not sliced Raindrop here.
Credit and license
Remix of Satyr 3 (DIY HiFi Headphones) by its original author and of Satyr3 Alternate Fasciae by Aplo. Licensed CC BY-NC 4.0 like both of them, so for non-commercial use only.
This is an unofficial fan design, not affiliated with or endorsed by the Satyr 3 author. "Satyr 3" is used only to describe compatibility.
More from Soundblooms: soundblooms.com - audio prints, apps and DAC measurements. Questions or ideas? Discord.