Universal Buffer Tube Sling Point
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of Luke's Nexus Pro sling pointreplacing with a smooth inner surface + relief cut for a universal clamping fit.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Universal Buffer Tube Sling Point is a straight remix of the popular Nexus Pro sling point designed by Luke at Out of Darts. Replacing the blaster-specific knurling with a smooth inner surface, and adding a relief cut at the top, this low-profile sling point now snuggly clamps onto most buffer tube stock points available on high-powered nerf blasters. Its ambidextrous lower loops allow it to fit most ergonomic preferences. Additionally, the sling point can be secured as an extra stop to record a preferred stock length or in-between setting. Available in the original square nut, and my preffered heat-set insert version.
FEATURES:
• Universal Buffer Tube Sling Point
• Adds a convenient sling point to compatible blasters
• Simple installation, slide on and tighten one screw
• Ambidextrous dual-sided design
• Attach directly or use a loop of paracord
• Compatible with most Buffer Tube stock points on blasters
RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: At least 3 wall loops, 20% Infill
HARDWARE NEEDED:
• 1 M3 x 6.4mm Heat-Set Insert
• 1 M3 x 16-18mm Socket Head Screw
or
• 1 M3 Square Nut
• 1 M3 x 14mm Socket Head Screw