Pint Wide Mouth Jar Beer Crate

Crate for stackable storage of pint and half-pint wide-mouth jars from Ball and Kerr, and any similar sized jars.  This can take two jars of half-pint size in each slot, or one pint size.  This model is designed solely for stock lids as far as half-pint jars are concerned, not alternative plastic ones, since that would change the size of the slots to where normal stock lids would not be held in place sufficiently by the guides.

I took the source model and imported it into Blender, resized (some scaling, some selective stretching) for these jars, decreased the thickness of the walls, reduced overhangs by angling them to be self-supporting, reduced the hard corners that tend to gather dust and become hard to clean, and I made other general tweaks to reduce material use and smooth out some of the quirks that came from the resize and thickness modifications.  I also removed some of the long horizontal ribbing to use less material and less overhangs, since I've had issues with some milk crates with long horizontal overhangs. 

This stacks perfectly with https://www.printables.com/model/1701116-half-pint-wide-mouth-jar-beer-crate and has the same X and Y dimensions. 

This is also similar to but distinct from https://www.printables.com/model/1742601-half-pint-regular-mouth-jelly-jar-beer-crate-2x3 in that it's designed for a completely different jar.  This one holds four jars (2x2 arrangement) and the one for regular mouth jars holds six (2x3 arrangement) and those jars are not the same diameter or height.  

All three are derived from the same source model: