Impulse Ungineering Ontos "Buffer Tube" Sling Point
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple adaptation of my Sling Point remix to fit the adjustable stock post on Impulse Ungineering Ontos v2 Springer.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Impulse Ungineering Ontos "Buffer Tube" Sling Point is a simple adaptation of my Universal Buffer Tube Sling Point remix to fit the adjustable buffer-tube-ish style stock on the Impulse Ungineering. This low-profile sling mount onto the adjustable stock post. Its ambidextrous lower loops allow it to fit most ergonomic preferences. Additionally, the sling point can be secured as an extra stop to record a preferred stock length or in-between setting. Adapted for Complete hardware parity with Ontos kits. Just ask OOD for a couple of spare screws!
FEATURES:
• Ontos Sling Point
• A convenient sling mount for the Ontos
• Simple installation, slide on and tighten one screw
• Complete hardware parity with Ontos kits!
• Ambidextrous dual-sided design
• Attach directly or use a loop of paracord
• Designed for Impulse Ungineering Ontos v2
• Compatible with select Ontos v2 remixes
RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: At least 5 wall loops, 20% Infill
• Supports: Tree (Manual), Painted on overhangs (not the screw hole)
HARDWARE NEEDED:
• 1 M3 Hex Nut
• 1 M3 x 12mm Socket Head Screw