LayersFactory
Zgłoś model
1 / 1
Sovol SV08 (MAX, Regular, or other Vorons) Yavoth Toolhead Enhanced Instructions — zdjęcie 1

Sovol SV08 (MAX, Regular, or other Vorons) Yavoth Toolhead Enhanced Instructions

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sam Schultz

Sam Schultz

@SamSchultz_335647

These are to be used in conjunction with the simply beautiful designs from @3DPrintDemon!

Ocena
0 / 5
Polubienia
7
Pobrania
2
Wydruki
0
Wyświetlenia
180
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Voron Parts & Upgrades
Licencja
GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 7)Remiksy (0)Kolekcje (6)Powiązane

Ok so, I wont be posting pics this is a simple text guide lol. USE THE ORIGINAL GUIDE IN CONJUNCTION!!! I have only built my Yavoth I hurt myself so I have not yet been able to mount to the printer or program the board, I am using the Sovol SV08 Max in my case but I believe this is good for any Voron style printer.

Notes:

  • For the PTFE use 25mm should be basically perfect

  • Check your connections and connectors at least on the EEB36 Gen 2 its all JST-PH most of the fans and stuff will have JST-XH, PH is a good bit smaller.

  • For the Hotend Wires (on the EBB36 Gen2) crimp on ferrules for safety.

Order in which to build the toolhead:

  1. Load the LED front light assembly and front fan

  2. Mount the Rapido to the main body, you will need to remove the J mount on the top but reuse those screws, also you may need to remove the set screws and other screws to rotate the body to have the wires line up from the photo in the original guide.

  3. Install the two side part cooling fans, they are friction fit

  4. Ziptie the cables with the little indents, the zip ties move better one direction into the holes vs the other so if its hard flip it and try again

  5. Attach the top back part plus the long screws that hold it in at this point

  6. Mount the extruder using the button head scews

  7. The gold standoffs should be included with the extruder or the board attach these

  8. Mount the EBB to the standoffs, the original design has the EBB36 Gen 1 but there is a remix from me, not to toot my own horn, that supports the EBB36 Gen 2

  9. For the EBB you should use the included screws to mount to the gold standoffs. 

Again massive thank you to @3DPrintDemon he is the best! https://www.printables.com/@3DPrintDemon