1 / 3
Custom d20 — Fair Die & Spindown Counter, 2-Colour Inlay Numbers — zdjęcie 1
1 / 3

Custom d20 — Fair Die & Spindown Counter, 2-Colour Inlay Numbers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A parametric d20 in two numbering layouts: a FAIR gaming die (opposite faces sum to 21

Ocena
0 / 5
Polubienia
6
Pobrania
49
Wydruki
0
Wyświetlenia
132
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

A fully parametric 20-sided die that ships in two numbering layouts and a clean two-colour inlay for the numbers.

Standard (fair die) — opposite faces sum to 21 and every digit is rotated apex-up, exactly like a commercial gaming d20. Roll it for D&D / any tabletop

Rpg.

Spindown (life / turn counter) — consecutive numbers sit on edge-adjacent faces, so tapping the die one step at a time walks 20 → 19 → 18 … upright. Perfect for Magic: The Gathering life totals or hit-point / round tracking. (Not a fair die — a consecutive chain and sum-21 can't both hold.)

Two-colour numbers. Each layout ships as two files:

  • *_body.stl — the icosahedron with recessed number pockets (colour A)

  • *_plugs.stl — the digit prisms that drop into those pockets (colour B)

Print the body in one filament and the plugs in another, then press/glue the plugs into the pockets — or, with the included .scad, generate a single "Split to Parts" combined STL for an AMS multi-colour plate.

Fully editable source. The .scad exposes size (16 mm gaming / 22 mm counter presets, or any edge length), digit size, recess depth, edge fillet, font, and the whole face-value table, plus arabic / roman / letter (A–T) symbol sets. Design your own die.

Print notes:

  • Prints flat — a whole face is auto-rotated onto the bed for a real triangular base. Use a brim (convex solid, ~48° lower-hemisphere overhangs) — no supports needed.

  • Bigger = more stable; the 22 mm counter preset is the easiest print.

  • 0.2 mm layers, 3+ walls. Any PLA/PETG.

Photos: printed at counter size in dark-green PLA with lime-yellow number plugs.

Tagi