Telescope Crane for 25cm Benchy (or free stranding)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Telescope crane for a 25cm benchy. Can also be used as free standing.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an extendable crane addon for a 25cm long benchy (rezised Benchy attached). The crane rotates and extends from 80mm lenght to 160mm.
It is outfitted with guildes for a with a fishing line with a hook, but its also possible to attach a hook directly to the end of the crane.
While it slots into the cargo-box of the benchy, it also works as free standing.
Printing instructions:
PLA
0,15mm Layer Height
Additional parts needed:
M5 screw 24mm (Can be replaced by a printed rod of the same dimensions)
Glue used to attach the Plug to the Base, and the bottom box to the platform (see section analysis image).
The tabs of the Bottom and Middle Arm parts may need to be cut to shape, due to very small geometry.
The crane as well as the benchy can be scaled up, but the geometry does likely not support being scaled down much.