LayersFactory
Zgłoś model
1 / 4
Van Halen Name Logo — zdjęcie 1
1 / 4

Van Halen Name Logo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DPs_Designs

DPs_Designs

@DPs_Designs_4882792

Bring the soaring energy of classic Eddie Van Halen style to your wall with this 3D-printable logo plaque

Ocena
0 / 5
Polubienia
10
Pobrania
36
Wydruki
0
Wyświetlenia
78
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (6)Powiązane

Jump right into this next addition to my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.

This model replicates the iconic winged emblem of Van Halen, complete with the stylized "VH" background and the overlapping center banner. Designed without a base backing plate, the emblem relies entirely on its interlocking structure for a bold, floating presentation straight on your wall.

Equipped with (2) built-in keyhole slots on the back, it mounts completely flush using #3 screws or small finish nails.

Dimensions

  • Width: 8”

  • Height: 4.7”

  • VH Thickness: 0.25”

  • Ribbon Thickness: 0.125”

  • Total Thickness: 0.375”

  • Mounting: (2) Built-in key-hole slots on back for #3 screws or nails.

Print Settings

  • Material: PLA (Or clear PETG/PLA for a fully translucent floating look on the Hidden Base variant)

  • Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the blocky angles of the letters).

  • Infill: 10% or higher (Gyroid or Grid patterns work beautifully for stability).

  • Supports Required: Because the banner ribbon overhangs across the underlying "VH" structure, supports are required for a clean print.

    • Slicer Tip: Be sure to place support blockers directly over the rear keyhole slots so they stay clear of support material and preserve their clean mounting geometry!

 

Where It All Began:

Curious about the original hand-drawn concept art that inspired this whole series? Check out the model that started it all:

Tagi

musicdesktopsignretroplaquegothichomedecorwallartheavymetalvanhalenrockandrollhardrockbandlogoclassicrock90snostalgiathrashmetalslavetothemetalhairmetalglammetalfloatingtextclassicmetal90srockindustrialrockaltrock