Nine Inch Nails Name Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bring the raw industrial vibe of Trent Reznor’s iconic NIN logo to your display with this 3D-printable plaque
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bow down before the one you serve! This model is part of my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.
This piece captures the minimalist, razor-sharp design of the classic Nine Inch Nails emblem. Framed inside a clean outer border, the iconic inverted "N" logo features a sharp 0.25” inset that brings great depth and visual punch to your wall or shelf.
Dimensions
Width: 8”
Height: 3.5”
Border: 0.5”
Text Width: 6”
Text Height: 1.75”
Inset: 0.25”
Thickness: 0.5”
Mounting: Features (2) built-in key-hole slots on the back of the base variant for easy hanging with #3 screws or nails.
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the blocky angles of the letters).
Infill: 10% or higher (Gyroid or Grid patterns work beautifully for stability).
Supports: None required when printed flat on the bed.
Where It All Began:
Curious about the original hand-drawn concept art that inspired this whole series? Check out the model that started it all: