1 / 2
Parametric Sloped Wall Dice Tray (EDC) — zdjęcie 1
1 / 2

Parametric Sloped Wall Dice Tray (EDC)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An elegant dice tray with sloped walls for a better view on your dice. With high walls to prevent dice from jumping out.

Ocena
0 / 5
Polubienia
4
Pobrania
5
Wydruki
0
Wyświetlenia
47
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

Time for a parametric dice tray to fit your needs. Small, big, tall or low whatever you prefer. Make your dice tray, YOUR dice tray.

This includes files for Fusion360 to modify the size and details of this dice tray.

  • irad: Inner radius of the hexagon, side to center.

  • ic: Inner chamfer, sets the distance of the chamfer at the bottom of the tray.

  • h: Inner height of the tray.

  • wall: Wall thickness, standard 5mm.

  • b: Bottom thickness, standard 3mm.

Some example STL files are available as well. If you're not using fusion, comment your needs and I'll upload more example models.

Additional info:

  • Total diamenter side to side is 2*(irad+wall).

  • Total height is h+b.

  • For the version with feet, make sure the inner chamfer is not too short so the threaded holes are covered.

  • The feet use M10x1.5 threads, tolerance gap is already added to the tray part. 

  • Added a little slits in the feet to use a flat head screwdriver for easier assembly. Be gentle.

  • Felt feet are also nice to add to the trays in general.

  • It can also function as a nice catch all tray, adjust parameters as needed

I also played around with bumpmesh and made an example tray with textured outside. Go give it a try to make your dice tray even more individual.

Print Settings:

  • no supports

  • threads on the tray already have tolerance gaps of 0.15mm

  • 0.2mm layerheight

  • gyroid infill to minimize bulging on outer sides when printing the inner top surface (keep the bottom thickness 3mm)

  • I prefere PETG, but any material works here.

Story:

This was just a derivative of a tray for another project I work on, but I liked the design and style so much, I decided to make it it's own project. Cleaned up the fusion files, added parameters and here we are. Happy printing.

Disclaimer: The dice in the pictures are my own creation, if you're interested in that, check out my Instagram profile and contact me there. Same for print on demand. I don't have a shop and do commissions and print on demand as my time allows.

Tagi