Modifiable Modular Drawer - No Supports needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Modular Drawer that doesn't require supports AND can be modified to the size that you may need.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modular drawer that YOU can change to the size that you may need. The drawers connect via a casing (the green part) with sliders and a connector near the back. You can then add the drawer (the pink part) to the casing by inserting it at an angle from the floor and then pushing forward (seen in picture 5). This way, the drawer won't just fall. You can modify the drawer size by downloading the Fusion file. Once you open the Fusion file in Autodesk Fusion, you can change the parameters to whatever you may need (seen in pictures 2 and 3). You may need to sand down the part if its to thight.
If you have any questions, please leave a comment, and happy printing.