Ender 3 E3D V6/Sherpa Petsfang mount Remake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
E3D V6/Sherpa Petsfang mount Remake for the Ender 3.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to change the heatbreak fan from being in the front to the side. so airflow isnt being blocked by the mounting bracket. I decided to convert my Bondtech to a Sherpa because I could fasten it firmly above the hot end as to not flex as much (seems to have improved my retraction).
Cr/BlTouch is mounted using the original metal bracket.
Paint manual supports to the SLIM Front Part Cooler Casing (inside the blower intake opening - see pic)
Safety Tip: Make sure the wires do not rub/wear against the railing as the hot end moves.
Sherpa micro and extra heavy compatible.
*Notes
I chose to remake the Ender 3 base from the petsfang because is was easier to screw and remove compared to other designs.
The Fan Duct is a remake Blockhead to allow room for the side fan. I also wanted the heat block to be visible.
"Compact" Fan duct version is a remake of the 5015 6Deg-ADXL dual ducts from the Hero Me Gen 7.
I really have no idea what to name this project