BRZ/86/FRS GoPro rear headliner mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GoPro mount for the twins that goes in place of the 3 plastic retainers at the rear of the headliner
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Saw a similar version of this mount for sale using a bolt that would be a pain to remove and restore to stock. The item was no longer available for purchase and I figured I could make something similar but with easier integrated mounting. Mine uses a M3-20mm bolt to expand the 4 tabs and lock it into place, it makes it far easier to install and remove and needs less hardware. Spikes that dig into the headliner are within the retainer footprint so any marks they leave will be hidden by the OEM retainer if reverted to stock.
I played with different locations for the camera, there are 3 different retainers back there. I tried the center first as I thought it would be an ideal view until I watched some footage from that spot-the rear view mirror completely covers the vanishing point from there. I settled on the passenger side spot and removing the head rest when filming, it gives close to a passenger eye viewpoint. I prefer the 90 degree mount, the 90 degree low profile is a little tight against the headliner.
I printed 100% infill, PETG, supports everywhere, and with the model laying on it's side so the 3 GoPro tabs are horizontal for more strength of both the tabs and the base tabs that lock it into place. Made in Tinkercad.